HANDPRINT FLAG DIY KIT   Base coat your sign with white paint with the foam brush, start with the edges first then fill in the front of the sign with your paint.   Let it dry completely, apply a second coat if needed.   Take the wood stick to rub down the front of the vinyl stencil to make sure the image will stick to the clear tape.  Carefully peal the clear transfer tape off backing making sure the image is stuck to the tape.  Stick your stencil image on your board, use the wood stick to rub the vinyl...

I've Got Sunshine DIY Sign Kit Instructions Paint your background with the foam brush.  If using the blended color/ombre method, start with your darkest color on one end and brush back and forth until paint is distributed.  The move up the board and paint your middle color, grabbing some from the first color and mixing it in a bit with the second to get the 'seams' to blend.  Continue with the third color using the same brush and just keep going back anf forth until you get a nice mix.  Feel free to add more paint if desired to get...

  Base coat your sign with white paint with the foam brush, start with the edges first then fill in the front of the sign with your paint.   Let it dry completely, apply a second coat if needed.   Take the wood stick to rub down the front of the vinyl stencil to make sure the image will stick to the clear tape.  Carefully peal the clear transfer tape off backing making sure the image is stuck to the tape.  Stick your stencil image on your board, use the wood stick to rub the vinyl to make sure it...

  Base coat your sign with the foam brush, start with the edges first then fill in the front of the sign with your paint.   Let it dry completely, apply a second coat if needed.   Take the wood stick to rub down the front of the vinyl stencil to make sure the image will stick to the clear tape.  Carefully peal the clear transfer tape off backing making sure the image is stuck to the tape.  Stick your stencil image on your board, issuing the wood stick to rub the vinyl to make sure it will stick to...

Basecoat your sign with the foam brush, start with the edges first then fill in the front of the sign with the blue paint Let it dry completely, apply a second coat if needed Take the wood stick to rub down the front of the vinyl stencil to make sure the image will stick to the clear transfer tape Carefully peal the clear transfer tape off backing making sure the image is stuck to the tape. Stick your stencil image on your board, using the wood stick to rub the vinyl to make sure it will stick to the board...