You will receive an
8x8 wood sign
1 foam brush
1 foam wedge
white & black paint
sawtooth hanger
vinyl design
Instructions
Use the foam brush to paint the sign white..let dry in between coats
when dry turn your sign over use a hammer to nail the sawtooth hanger to the top back of the sign (optional)
Turn your sign over to the front and you are ready for the vinyl design
carefully peel the vinyl design off the backing and adhere to the center of the sign board..press down to smooth out all air bubbles
carefully peel back the clear transfer tape off the front of the design
use your foam wedge and dip into the black paint...make sure you dab off all the excess paint..you want to do VERY light coats of paint or you will get bleeding under the vinyl design..repeat until you get your desired color
when dry peel carefully peel off the vinyl around your design
enjoy!!
https://youtu.be/s5omtjDXGZQ