Basecoat your sign with the foam brush, start with the edges first then fill in the front of the sign with the blue paint Let it dry completely, apply a second coat if needed Take the wood stick to rub down the front of the vinyl stencil to make sure the image will stick to the clear transfer tape Carefully peal the clear transfer tape off backing making sure the image is stuck to the tape. Stick your stencil image on your board, using the wood stick to rub the vinyl to make sure it will stick to the board...

  Base coat your Board using the foam brush.  Start with the edges first then fill in the rest. Let dry completely, apply second coat if needed take an old credit card to rub down the front of the vinyl stencil to make sure the image will stick to the tape. Carefully peal the clear transfer tape off backing making sure the image is stuck to the tape. This kit has many tiny parts..make sure you have all the lettering pieces stuck to the transfer tape..if you need too, rub with the credit card as you are peeling. Stick your...

    Base coat your Board using the foam brush.  Start with the edges first then fill in the rest. If you would like to use these paints for a "stained" look, instead of using the foam brush to paint you can use a baby wipe or a damp paper towel to dip into the paint and smooth on your board.  This will let the wood grain show through.    Let dry completely, apply second coat if needed take an old credit card to rub down the front of the vinyl stencil to make sure the image will stick to...

      Download your free printable here